Slash 4x4 tires

[Brady Matthews]

I have a slash 4x4 that has a castle brushless 3s motor and it keeps blowing out the tires, what is the best brand of tires that would hold up to the motor?

 

[Cowboy Yert]

Proline

 

[Brady Matthews]

I was thinking about proline but I wasn't sure.

 

[DavidB1126]

Proline, duratrax, jconcepts
Anything belted tbh

 

[BarnFabRC]

I have a slash 4x4 that has a castle brushless 3s motor and it keeps blowing out the tires, what is the best brand of tires that would hold up to the motor?

Currently I have JConcepts sprinters on mine. I was using it on an outdoor clay track but I got a T6.4 in the works that’s going to replace the slash. A couple weeks ago I had it out in my buddy’s 20 acre farm field. And they held up fine against my castle setup on 3s. Full throttle runs corner to corner for a couple packs.

 

[Greywolf74]

Anything belted should be fine.

 

[tntpoof]

I dont know of any tires that will handle a 3 cells power..belted or not you will still Blow them Apart...

 

[Brady Matthews]

Ok I will try them. Thanks!

 

[blaster27]

Prolines are the best. I bought the wheels with the interchangeable hubs. I went with metal. Pricey though. No need for belted on 3s. JMHO.

 

[Ramp addict]

Proline 2.8 Badlands, it's what I run on mine.

 

[blaster27]

Kinda depends what you're looking for. I went with the same size. Want over sized? Get 6 packs. I did not want a monster truck tire on my Slash. That's why I have this. And that.

 

[Brady Matthews]

Prolines are the best. I bought the wheels with the interchangeable hubs. I went with metal. Pricey though. No need for belted on 3s. JMHO.View attachment 177948View attachment 177949

These tires look great! I was going for about the same size as stock.

 

[Mrgoodwrench35]

Proline makes a set of trenchers pretty close to the stock size. That's what I'm running on mine currently and they have made it a couple years so far on a 3s castle motor.

 

[Brady Matthews]

Proline makes a set of trenchers pretty close to the stock size. That's what I'm running on mine currently and they have made it a couple years so far on a 3s castle motor.

Ok that was very helpful with my search. I will try them. Thanks!

 

[blaster27]

 

[Brady Matthews]

Dang that looks good!

 

[Mrgoodwrench35]

That is one nice looking sledge.

 

[blaster27]

I really get into tires.

 

[Mrgoodwrench35]

I've never ran paddle tires on an RC. Is that for snow? Used to use them on dirtbikes when riding dunes but never rc

 

[Ramp addict]

Badlands 2.2/2.8 SCT. I run these on my Tekno ET410. They're good on asphalt to loam.