Recently decided to do something with my TRX Rustler based tagged R1E (Racer No. 1 Electric). Rustler components modified with an in-house CF chassis. Raced it full prep as a bracket truck 2005-2006. In 2018 modified it for no-prep street running. Since then it has been in attic storage.
Looking at a two-phase project. Phase one, since it is more or less set up for street use, will make some speed runs with a GNSS speed meter. Phase two, looking at conversion for use in my back yard grass track oval. Phase two alpha being a possible conversion to mid-motor for oval running.
Bottom chassis plate is 1/8" CF and seems rigid enough for the rigors of no jump, no bump grass track racing. So off I go. Hope you follow along. Cheers. 'AC'
Looking at a two-phase project. Phase one, since it is more or less set up for street use, will make some speed runs with a GNSS speed meter. Phase two, looking at conversion for use in my back yard grass track oval. Phase two alpha being a possible conversion to mid-motor for oval running.
Bottom chassis plate is 1/8" CF and seems rigid enough for the rigors of no jump, no bump grass track racing. So off I go. Hope you follow along. Cheers. 'AC'