Problem with starting - LSN (rookie)

[Engstrom0304]

Hey guys,

I have a new car. It uses the hong nor force 28 engine. I have set the engine up as the manual says but something isnt right!

The manual says to close the LSN all the way then open 2 1/2 turns. But the LSN seems to close far too much! When I open it 2 1/2 turns it is still really far in!

The 1mm gap is correct on the carb and the HSN is set 3 turns out. Engine cuts out immediately after about a second of high revs with wheels turning fast. Should I change the LSN?

 

[maddmike]

My guess is its your hsn lean it out and a little on your lsn

 

[Childresshunt]

It sounds to me like you need to richen your hsn if you hitting hi revs quickly then its dying its most likely to lean.