Engstrom0304
RC Newbie
- Messages
- 11
- Reaction score
- 0
- RC Driving Style
Hey guys,
I have a new car. It uses the hong nor force 28 engine. I have set the engine up as the manual says but something isnt right!
The manual says to close the LSN all the way then open 2 1/2 turns. But the LSN seems to close far too much! When I open it 2 1/2 turns it is still really far in!
The 1mm gap is correct on the carb and the HSN is set 3 turns out. Engine cuts out immediately after about a second of high revs with wheels turning fast. Should I change the LSN?
I have a new car. It uses the hong nor force 28 engine. I have set the engine up as the manual says but something isnt right!
The manual says to close the LSN all the way then open 2 1/2 turns. But the LSN seems to close far too much! When I open it 2 1/2 turns it is still really far in!
The 1mm gap is correct on the carb and the HSN is set 3 turns out. Engine cuts out immediately after about a second of high revs with wheels turning fast. Should I change the LSN?