Please help!!!

[Anonymous.]

I don’t know how to get the front Wheele off this micro car does anyone know how? There’s no video on YouTube either. It’s a sc28

 

[WideOpen]

take a picture of the front of the hub, like where the hub-cap/lug nuts would be.

 

[STONER RC]

I don’t know how to get the front Wheele off this micro car does anyone know how? There’s no video on YouTube either. It’s a sc28

Post a picture of the hub/nut area bud like this

We got to see what's going on with the tire. Not the top of tire

 

[WideOpen]

If I understand correctly you are wanting to remove the tire and by "tire" I presume you mean the wheel too. If so, just remove that nut in the center of the wheel and pull the wheel and tire off. Is that what you are after?

 

[Doom!]

These are really hard to make out, they don't appear to have a working bolt. The must attach from the inside somehow.
I found this pic but, I can't make heads or tales from it. The manual on their website doesn't help either.

 

[Anonymous.]

These are really hard to make out, they don't appear to have a working bolt. The must attach from the inside somehow.
I found this pic but, I can't make heads or tales from it. The manual on their website doesn't help either.
View attachment 134404

Yeah that’s kinda what I thought too. It’s not a actual nut it’s more like a pin. I basically just want to take apart the entire front section. It’s steers In correctly because the Wheele is dirty and needs to be cleaned
I want to take this entire section apart

 

[STONER RC]

Yeah that’s kinda what I thought too. It’s not a actual nut it’s more like a pin. I basically just want to take apart the entire front section. It’s steers In correctly because the Wheele is dirty and needs to be cleaned
I want to take this entire section apart

So is that chrome dot. I'm guessing is the axle? Does it have a pin going threw it? Or does it pull out?. I'm going have to download manual and take a look

 

[Anonymous.]

So is that chrome dot. I'm guessing is the axle? Does it have a pin going threw it? Or does it pull out?. I'm going have to download manual and take a look

I’m just as confused as you right now

 

[STONER RC]

I’m just as confused as you right now

Chinesium RC

 

[WideOpen]

ya, sorry I didn't pay attention, I jumped to the conclusion that the picture Stoner posted was your - it was just sample of what we needed to see. In the picture above showing the inside of the wheel, can you take a more clear picture - that one looks a bit blurry.

 

[WickedFog]

They are just pressed on. They pull off.

 

[WideOpen]

They are just pressed on. They pull off.

Yikes!!!

 

[STONER RC]

ya, sorry I didn't pay attention, I jumped to the conclusion that the picture Stoner posted was your - it was just sample of what we needed to see. In the picture above showing the inside of the wheel, can you take a more clear picture - that one looks a bit blurry.

It looks like just roller pins. It looks like it 2wd. So those front pins should pull out or they just don't come off at all.

 

[WickedFog]

It looks like just roller pins. It looks like it 2wd. So those front pins should pull out or they just don't come off at all.

No, they come off. I have 3 vehicles like that, different brands, but the chassis all look the same. The wheels just pull off. A bit tight though. Might need a dab of glue putting them back on, but not likely.

 

[STONER RC]

Yeah that’s kinda what I thought too. It’s not a actual nut it’s more like a pin. I basically just want to take apart the entire front section. It’s steers In correctly because the Wheele is dirty and needs to be cleaned
I want to take this entire section apart

Ok so give then a pull as stated above and see what happens. As that's the way I believe they come off as well

 

[WideOpen]

Gulp.....

 

[biggman100]

I don’t know how to get the front Wheele off this micro car does anyone know how? There’s no video on YouTube either. It’s a sc28

You just twist and pull. This video:

shows you how.

 

[STONER RC]

Ok there you have it bud. Twist and pull. Let us know how you make out

 

[Anonymous.]

Alright I will try that
got it! Thanks guys! It was a real pain to get off though.

 

[STONER RC]

Alright I will try that
got it! Thanks guys! It was a real pain to get off though.

Oh I'm sure it was bud. So you were able to get the tires off?