One-way bearing replacement

[Brady Matthews]

The one-way bearing fell apart in my .21 nitro engine. What is the best way to replace the bearing or do I need to replace the whole thing?

 

[jimdavis577]

I don't know that motor specifically..... but most the time they are replaceable ... I would look at a parts diagram of the motor to see if you can buy just the bearing that will give you a good indication or not

 

[Brady Matthews]

I don't know that motor specifically..... but most the time they are replaceable ... I would look at a parts diagram of the motor to see if you can buy just the bearing that will give you a good indication or not

Ok, thank you

 

[Jerold]

If it's got markings on it, it could be a standard part. Which means you might find it on McMaster Carr.
https://www.mcmaster.com/products/one-way-bearings/

 

[Brady Matthews]

If it's got markings on it, it could be a standard part. Which means you might find it on McMaster Carr.
https://www.mcmaster.com/products/one-way-bearings/

How do you get the bearing out? Do you drive it out with a punch or something?

 

[Jerold]

How do you get the bearing out? Do you drive it out with a punch or something?

I dunno, that's a good question. You might be able to press it out with a vise and some sockets?

 

[Chubaka]

Most people replace the whole thing but a few people will take it apart and repair it. I'm assuming good ol heat then the punch.

 

[Chubaka]

https://www.hpisavageforum.com/threads/one-way-bearing-fix.19370/

 

[Brady Matthews]

https://www.hpisavageforum.com/threads/one-way-bearing-fix.19370/

Thank you for the help, I will try that