Nitro rustler os21

[iamnotsmart]

Does anyone have a clue how I could make this work like a better exhaust or manifold setup for this I only had this manifold and exhaust for this and I was gonna put this on my Revo but this was way easier to be honest just having trouble with my throttle setup bc I think it’s just setup wrong but it works just closes a lot and is open a lot and can’t edit the throttle on my remote with function because think it’s too tight or sum idk and does anyone know how to clean rust on your cars like on the bolts and stuff?

 

[iamnotsmart]

 

[gragner66]

Need a header pipe that will face to the front. Use a stock pipe hanger. May have to bend it some to work. Or cut a metal coat hanger. May could cut header u have and make it work

 

[iamnotsmart]

View attachment 216657

Need a header pipe that will face to the front. Use a stock pipe hanger. May have to bend it some to work. Or cut a metal coat hanger

Do you think I can use it like that or maybe it might drag the ground the pipe when I wheelie or hit somewhere else and do you know how powerful that engine is on there I just put it on

 

[iamnotsmart]

Do you think I can use it like that or maybe it might drag the ground the pipe when I wheelie or hit somewhere else and do you know how powerful that engine is on there I just put it on

And It won’t hit the ground when I wheelie nvm idk what I’m talking about

 

[iamnotsmart]

And It won’t hit the ground when I wheelie nvm idk what I’m talking about

Is there any videos of one with a os21 tm can’t find any I used to have a 3.3 on it tho

 

[gragner66]

It’s gonna hit the tire when u jump and flex the a arm

 

[iamnotsmart]

It’s gonna hit the tire when u jump and flex the a arm

Wym flex the a arm and it won’t hit the tire I checked the clearance

 

[iamnotsmart]

Wym flex the a arm and it won’t hit the tire I checked the clearance

Do you know how can I loosening my hearing or should it be really tight bc when I push the car it’s like the brakes are on bc how tight it is and how close they are

 

[iamnotsmart]

Do you know how can I loosening my hearing or should it be really tight bc when I push the car it’s like the brakes are on bc how tight it is and how close they are

And sounds. A lil weird

 

[Chubaka]

If it doesn't rub, you can runt it but snd roll or crash may put it in danger.

You want a header similar to this.if you have a local hobby shop i would take it in and look at the headers they have.
https://www.absolutehobbyz.com/o-s-...N7zj0fLPBg6agLTyehB3vPqSzDPJ7KLMEQkLq8U&gQT=1

On a side note front arms aren't reccomended due to more likely to break something. It's a free world and you do you but the arms, bulkhead, and lower chassis out of aluminum something will give eventually.

Nice ride by the way.

 

[iamnotsmart]

If it doesn't rub, you can runt it but snd roll or crash may put it in danger.

You want a header similar to this.if you have a local hobby shop i would take it in and look at the headers they have.
https://www.absolutehobbyz.com/o-s-...N7zj0fLPBg6agLTyehB3vPqSzDPJ7KLMEQkLq8U&gQT=1

On a side note front arms aren't reccomended due to more likely to break something. It's a free world and you do you but the arms, bulkhead, and lower chassis out of aluminum something will give eventually.

Nice ride by the way.

I have a exhaust like this that was with my 3.3

 

[gragner66]

I have a exhaust like this that was with my 3.3

View attachment 216659

I have the Cvec pipe on mine too

 

[iamnotsmart]

I have the Cvec pipe on mine too

With the os engine or 3.3 or 2.5

 

[gragner66]

Cvek on the 2.5. Vantage CF on an OS 18
This is the placement u need

 

[iamnotsmart]

Damn it looks nice what should I do to mine?

 

[gragner66]

Thnx. U can spend $60 on a header or cut pipe that’s on it where it’s facing front of car. Just cut long as u can with it facing forward

 

[iamnotsmart]

Thnx. U can spend $60 on a header or cut pipe that’s on it where it’s facing front of car. Just cut long as u can with it facing forward

So buy what u sent?

 

[gragner66]

I think Chubaka sent link. $60 for a header alone is crazy IMO though. Google a stock tmaxx header on a 2.5 it might be cheaper. I think that’s what I used on carbon fiber pipe

 

[gragner66]

Look on eBay. Header is $38