Jimbobjr
RCTalk Talkaholic
Back in April I posted about Negative G kits and know one replied so I guess they are not well known here. The kits have everything you need to convert a donor vehicle (kits available: Trx4, scx10iii, and Capra) into an LCG crawler. You use the axles, links, shocks and electrics, they provide everything else.
https://negativegrc.com/
Rails, motor plate, front bumper mount are carbon fiber. Most everything else is 3d printed. There’s also a stub shaft to connect to the transfer case, front right link as well as quality hardware, bearings and gears. You also need to mount the body which they designed their supports to take traxxas mounts and cut them to length.
I’m still waiting on the postman for a few things so it might be a few days before there’s any progress but will post along the way and make some running footage against my other crawlers.
So far I just weighted my wheels with low melt and put the primary and transfer case together.
https://negativegrc.com/
Rails, motor plate, front bumper mount are carbon fiber. Most everything else is 3d printed. There’s also a stub shaft to connect to the transfer case, front right link as well as quality hardware, bearings and gears. You also need to mount the body which they designed their supports to take traxxas mounts and cut them to length.
I’m still waiting on the postman for a few things so it might be a few days before there’s any progress but will post along the way and make some running footage against my other crawlers.
So far I just weighted my wheels with low melt and put the primary and transfer case together.