mini t problem

[Mattyfats420]

i got a new tx/rx for my mini t and the steering servo has a 4 prong connector and the rx has on a three prong connector. what should i do

 

[marauder]

If you're referring to the stock mini-t servo you have to replace it. I highly suggest the airtronics servo.

 

[Mattyfats420]

i guess theres no way to get it with the stock servo. i ordered one but its on back order....man now I'm pissed

 

[Candyman]

Unfortunately the entire electronics package on the Mini-T is proprietary. So if you want to convert to a different radio, you also have to get a new ESC and a new steering servo.

 

[Mattyfats420]

Unfortunately the entire electronics package on the Mini-T is proprietary. So if you want to convert to a different radio, you also have to get a new ESC and a new steering servo.

I'm gonna cancel my order through horizion hobby and get it through tower instead and have them over night it to me. do i just take off the saver from my stock servo and transfer it to the new one?

 

[Cupooterluvr]

You may need a new servo arm because the Losi servo arm might not fit the new servo.

 

[Mattyfats420]

ok ill just get one than, guess its always good to have another one handy

 

[marauder]

You would have to ask robmob, I bought my Mini-T from him with the airtronics servo installed. I've taken it off to put it onto a new chassis but I really haven't paid much attention to it in detail. I just know it is very precise and my Mini-T handles like it's on rails.

Did you end up going with an airtronics?

 

[Mattyfats420]

according to tower its discontinued so i went with the hitec hs-55 sub micro servo

also i dont know what shock oil i should get. let me know what you guys think

 

[Mattyfats420]

pics are up on the member project forum

 

[Rs4 drift]

i have a hs-65-hb with karbonite grears id suggest that