Mgt 4.6 only 2wd.. 🤦‍♂️

[Bluetickduke]

Hey guys!

So I recently changed my spur gear from 52 to 50..I even remembered to put the 5/6 traction pins in also

Everything went smooth it seemed like, until I test drove it afterwards.

The back wheels are not working. They spin freely but when power is given, the front wheels are the only ones Doin work ..

I assume I did something when I messed with the clutch and everything?

Any recommendations or advice is greatly appreciated!

 

[cbaker65]

Hey guys!

So I recently changed my spur gear from 52 to 50..I even remembered to put the 5/6 traction pins in also

Everything went smooth it seemed like, until I test drove it afterwards.

The back wheels are not working. They spin freely but when power is given, the front wheels are the only ones Doin work ..

I assume I did something when I messed with the clutch and everything?

Any recommendations or advice is greatly appreciated!

Check the grub screw on the rear diff output cup on the drive shaft ,they tend to work loose!..

 

[Bluetickduke]

Check the grub screw on the rear diff output cup on the drive shaft ,they tend to work loose!..

Will do!

I'm really really hoping nothing is wrong with the transmission..

 

[cbaker65]

Will do!

I'm really really hoping nothing is wrong with the transmission..

If there was anything wrong with tranny ,you wont have nothing ,usually when a front or rear diff quits
pulling ,it would be a output cup grub screw or a wheel pin!..

 

[Bluetickduke]

If there was anything wrong with tranny ,you wont have nothing ,usually when a front or rear diff quits
pulling ,it would be a output cup grub screw or a wheel pin!..

You nailed it bro!

The grub screw isn't even there

Thank you

 

[Greywolf74]

Sensei Baker 347,563,289,674,239,867

Nitro Rigs: 0