h8z2luze
RCTalk VIP
I got the 3racing mini lst shocks like rollinlow had on his mrc. SOO my question is what hardware do i need to mount them?
Losi Mini lst shocks
- Thread starter h8z2luze
- Start date
-
- Tags
- losi
Welcome to RCTalk
Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
rollinlow
Hardcore RCTalk User
take out the black tray and use the stock hardware and a nut
now that i think about it i just used a screw and nut i had laying around but put the big side on the frame not like my picture
like i did the stock shocksi have no good pictures of the lst
now that i think about it i just used a screw and nut i had laying around but put the big side on the frame not like my picture
like i did the stock shocksi have no good pictures of the lst
Last edited:
h8z2luze
RCTalk VIP
- Thread starter
- #3
But I dont have a brace in there. I got the 55mm axial links but i need to get some spacers to make them fit and I need to get some hardware too.
rollinlow
Hardcore RCTalk User
yea u need that brace for sure but i drilled out new holes for the brace and used the battary tray holes for the shocks
i got all my hardware from a rustler both kit i had so any kind of screws should work
i got all my hardware from a rustler both kit i had so any kind of screws should work
