Kraton 6s exb front dog bones popping out

[stav shevach]

I have my k6 for about a year after 3yrs of owning the v5. I noticed since I got the v5 that the front dog bones keep popping out constantly on landings. I’m currently running the max 6 g2 with the 1650kv motor. Stock dog bones throughout the car with front vitavon cups. Is there a fix for this? (Without buying the +1mm M2c/vitavon dog bones).

 

[9x19]

Welcome to RCT

I don't have any Arrma RCs, but assuming the slots in the drive cups aren't worn out, is there a way to limit your suspension travel a bit so the arms can't move far enough for the dog bones to slip free of the drive cups?

 

[stav shevach]

Welcome to RCT

I don't have any Arrma RCs, but assuming the slots in the drive cups aren't worn out, is there a way to limit your suspension travel a bit so the arms can't move far enough for the dog bones to slip free of the drive cups?

The problem happens when landing so it’s the opposite of droop. It’s when the shock bottoms out

 

[RustyUs]

I brought in the dog bones almost a whole 2mm...

 

[Ramp addict]

Once it pops out it damages the drive cup and it will be prone to popping out again. Replace the drive cup and remove the pillar ball spacers top and bottom and screw the pillar ball all the way in. This will give you an extra 2mm of dog bone/drive cup overlap. This will make a difference.