HPI Jumpshot advice needed please!

[Doug3d10]

Hi everyone.

I have had my hpi jumpshot sc (version 1) for a few years now and I am looking for an upgrade, I currently have a fully stock setup. I have a 2s 30C lipo which I would use to accompany my repairs. I would like to get increaced peformace all round, I would like to get a more powerful motor rather than a pinion gear which i will add afterwards. If anyone has any ideas please let me know!

Thanks

 

[tntpoof]

any 540 brushless setup will work . almost anything is better than that saturn 12t that was oem..a nice 10.5t will be fun till you break parts make sure you get a different lipo I dont think that 30c will cut it.id also pull gear diff apart and add new diff grease

 

[Doug3d10]

any 540 brushless setup will work . almost anything is better than that saturn 12t that was oem..a nice 10.5t will be fun till you break parts make sure you get a different lipo I dont think that 30c will cut it.id also pull gear diff apart and add new diff grease

Hi, will a brushless motor work with the stock esc? (SC-3SWP2 WATERPROOF ELECTRONIC SPEED CONTROL)

 

[Doug3d10]

Hi, will a brushless motor work with the stock esc? (SC-3SWP2 WATERPROOF ELECTRONIC SPEED CONTROL)

Or would this be a noticable upgrade.. (

Absima Thrust 1:10 Brushless ESC and 10T Motor Combo)​

 

[tntpoof]

it will be a noticeable difference. But it is non censored so you might have cogging issues. and a brushed esc will not work on a brushless motor

 

[monstertruckier15]

You can use a castle sidewinder 4600 kv setup.
Castle Creations Sidewinder SV3 Waterproof ESC & 1406-4600Kv Brushless Motor 819326011566 | eBay