Hobbywing 8bl150 end point adjusment

[Caleb90]

I bought a 6channel dumbo radio and a hobbywing 8bl150 esc. No where in the manual does it says how to adjust the endpoints for the servo. Any one have the know how on this?

 

[Starfox2005]

I bought a 6channel dumbo radio and a hobbywing 8bl150 esc. No where in the manual does it says how to adjust the endpoints for the servo. Any one have the know how on this?

Does the radio have steering dual rate?

 

[Caleb90]

This is the radio. https://www.amazon.com/gp/aw/d/B07Q112TQF?psc=1&ref=ppx_pop_mob_b_asin_title

The cheap radio that came with my bigrock will do endpoint adjustments. Figured this one would aswell seeing how it has more features

 

[WickedFog]

The Dumbo RC does have endpoint adjustments, but setting that radio up is such a pain compaired to the Flysky GT3, I can't for the life of me figure out why anybody buys them, or recommends them. The GT3 has a digital screen with easy to use menus for setting up everything. Endpoints, EXP, trim, channel reversing, etc is all done on screen.

 

[Tunedfrog]

I use both the GT3 and Spektrum DX5C, the GT3 is a good radio and very easy to set up.

 

[Caleb90]

The Dumbo RC does have endpoint adjustments, but setting that radio up is such a pain compaired to the Flysky GT3, I can't for the life of me figure out why anybody buys them, or recommends them. The GT3 has a digital screen with easy to use menus for setting up everything. Endpoints, EXP, trim, channel reversing, etc is all done on screen.

I could see the lcd screen breaking when one of my kids drop the transmitter

 

[WickedFog]

I could see the lcd screen breaking when one of my kids drop the transmitter

I have dropped mine a few times just moving stuff around my workbench. My kid has used it since he was 5, and he's almost 10 now.

 

[tntpoof]

a lanyard will prevent drops hitting the ground. i missed that rotatory control with the epa setting on channel 1 under that cover.

 

[WickedFog]

You can adjust the endpoints on the other channels as well I think with the bottom two knobs. But I think you have to go into the setup somehow to switch them to work the other channels. Not really sure. I just remember some guys talking about it in another group.

 

[Caleb90]

I will play with it and see what i can figure out. If i dont like it i will return and get a radiolink

 

[olds97_lss]

Looks like it's just the knobs for steering and throttle EPA, guessing it's a percentage for both directions, so you can't set it up to be x in one direction and n in another.

 

[WickedFog]

Looks like it's just the knobs for steering and throttle EPA, guessing it's a percentage for both directions, so you can't set it up to be x in one direction and n in another.

You can go into the settings to switch the EPA knobs to set channels 3 and 4 also (I think). I just don't remember how you do it.