Help installing receiver in TRX4

[OnwardGuinevere]

Hi all,

So I got my Fkysky GT3B transmitter and receiver a couple weeks ago. I was looking to install it this weekend, but once I opened up the TRX4 it looks like the process may be less straightforward than thought. The fkysky is 3 channel, but I have 4 Channels plugged in on the TQI.

Do I need any other hardware to install this thing? Or is it simpler than thought and I am missing something...

 

[Lostinthewoods86]

You’re going to need at least the flysky gt5 to get all the functions on the trx4

 

[Chubaka]

If 2 are diff locks, maybe a y-splitter so those can work on the same channel?

 

[OnwardGuinevere]

You’re going to need at least the flysky gt5 to get all the functions on the trx4

That was my thought too, once I opened everything up

 

[OnwardGuinevere]

Now to decide to hold on the the GT3B for my 1:18 trucks to upgrade those transmitters Or return and get the GT5 for the TRX 4

 

[Lostinthewoods86]

If 2 are diff locks, maybe a y-splitter so those can work on the same channel?

I see the two diff servos in the pic, there may be a third servo for 2 speed trans if equipped.

That was my thought too, once I opened everything up

We got one of ours on a g7p and the other on radiolink rc6gs. I like the radiolink switch setup over the g7p, but g7p is easier (at least for my limited brain cells ) to set up

 

[OnwardGuinevere]

I see the two diff servos in the pic, there may be a third servo for 2 speed trans if equipped.


We got one of ours on a g7p and the other on radiolink rc6gs. I like the radiolink switch setup over the g7p, but g7p is easier (at least for my limited brain cells ) to set up

I'll take a look at those transmitters too, thanks! the GT3B looks nice. I'd like to be able to plug in the AUX plug from my ESS dual as well, I haven't figured out if I can plug that in, while still using the stock transmitter.