Front Binding Issue

[monstertruckier15]

Does it do it when you turn the other way. I think you have a bad bearing on the inside of the steering knuckles. and that pushed the outside bearing out and the dog bone locks up. remove the steering knuckle and look for a bad or blown out bearing on the inside.

 

[Lewis.rs16]

Does it do it when you turn the other way? I think the you will have take the whole front off and see what is binding. It appears to be a dog bone and another bearing inside the steering hub.

It still binds the other way but hasn't yet locked up. I've already took the whole front off had a look and greased everything.

 

[Lewis.rs16]

Does it do it when you turn the other way. I think you have a bad bearing on the inside of the steering knuckles. and that pushed the outside bearing out and the dog bone locks up. remove the steering knuckle and look for a bad or blown out bearing on the inside.

Ok i'll try that.

 

[tntpoof]

after watching vid it looks like a bearing is bad or you have a worn out diff you can see the axel jump as wheel locks up..

 

[Lewis.rs16]

We switched the front wheels with the back and this problem was happening less often so obviously the front wheels was buckling causing oscillation, so need to try and get some new wheels

 

[monstertruckier15]

I would check the front diff for a broken bevel gear

 

[Lewis.rs16]

I would check the front diff for a broken bevel gear

Yeah we checked there before but everything looked fine apart from the grease, topped that up and still was happening but ran more smoothly, then switched the wheels

 

[monstertruckier15]

Did you take the diff apart? Adding grease to a open diff only makes a mess. So you think it's a bent wheel?

 

[Lewis.rs16]

Did you take the diff apart? Adding grease to a open diff only makes a mess. So you think it's a bent wheel?

Yeah the wheel is just unbalanced/bent, took the diff apart nothing looked wrong