ESC Question!

[CultOfMadness]

Morning guys!

Your local dumb dumb here again.

On the stock 2n1 ESC-Receiver the grey wire is the positive and the Black is the Neutral correct? I need to solder on the IC5 on the new Hobbywing one. The hobby wing one has it labelled the stock one does not. THANKS!

“I’d rather be the town dummy than the town bicycle”

-Steve

 

[WickedFog]

Morning guys!

Your local dumb dumb here again.

On the stock 2n1 ESC-Receiver the grey wire is the positive and the Black is the Neutral correct? I need to solder on the IC5 on the new Hobbywing one. The hobby wing one has it labelled the stock one does not. THANKS!

“I’d rather be the town dummy than the town bicycle”

-Steve

View attachment 214599

Yeah, that is correct.

 

[CultOfMadness]

Yeah, that is correct.

Thank you!

 

[332_RC]

Are you sure that's a IC5 on that 2n1?

 

[CultOfMadness]

I believe so! It’s the stock one that came with the esc for the smart batteries.

 

[Greywolf74]

Morning guys!

Your local dumb dumb here again.

On the stock 2n1 ESC-Receiver the grey wire is the positive and the Black is the Neutral correct? I need to solder on the IC5 on the new Hobbywing one. The hobby wing one has it labelled the stock one does not. THANKS!

“I’d rather be the town dummy than the town bicycle”

-Steve

View attachment 214599

The Grey wire is the "positive" The black wire is the "negative". The terms "load/receiver", "hot" and "neutral" are technically for AC. The proper DC terms are positive & negative.

As a side note, on IC and EC connectors the flat side of the connector is the positive side.

 

[CultOfMadness]

The Grey wire is the "positive" The black wire is the "negative". The terms "load/receiver", "hot" and "neutral" are technically for AC. The proper DC terms are positive & negative.

As a side note, on IC and EC connectors the flat side of the connector is the positive side.

Thank you!