Esc and motor advice

[Kevin86]

Do you think the mamba x 1900kv would be decent or would the 2280 be better? For the trx4.

 

[Tunedfrog]

If it were me, Holmes Hobbies

 

[rccar4life]

i dont think

i know that

2s 2280 will be better and have more torque than 1900kv

3s 1900kv if you crawl only

Trails also
3s 2280kv

Biggest lie in RC is that lover KV have more Torque

Castle is best in speedrunning

HW bashing

HOLMES Crawling

 

[Chubaka]

I have a 2280 copperhead in my scx10ii and love it. May try a 3800 in my current build. All I run is 3s.

 

[Kevin86]

If I’d go Holmes what options would I pick?

I was talking with someone else on here and for the 1900kv couldn’t I always up the gear or run a 4s lipo.

 

[Tunedfrog]

I have two I run with the brushed Trailmaster Sport 550 21T and I also have a Crawlmaster Sport 21T I haven't installed in anything yet.
Both of them are teamed up with a HW 1080 and run them through a program card.
I also run them both with 2s.

 

[Kevin86]

I ended up going with a monster x 1800kv combo.

Also sent an offer for a Tekin ROC412 HD 1800Kv and will pick up the rtx4 esc. I have 2 trx4’s so I’m going to run some tests between the 2.

The trx4 looks so much better with beadlock rims on 2.2 tires.. along with adding some serious weight down low.

 

[Tunedfrog]

It should be the law

 

[Kevin86]

Sitting on the dresser till everything comes.

The esc and motor you see is going in the 1/10 summit.

 

[Tunedfrog]

Very nice, thanks for sharing.

 

[Kevin86]

Few more for ya. Too many projects at once lol

 

[Tunedfrog]

You have a couple Xs in there, that's the important thing...

 

[Kevin86]

Coming along.

 

[tntpoof]

flip those rc on the hoods before your tires get flat spots or get the tires off the ground.

 

[Kevin86]

Don’t ever install a servo mount unless you plan on ripping the whole darn truck apart lol. Let’s just hope I remember where all these screws go.

 

[WickedFog]

Make sure you have the exploded views for the truck from Traxxas. They have the screw sizes all labeled on them.
https://traxxas.com/explodedviews/TRX-4-Trail-and-Scale-Crawler-82056-4-Transmission-Assembly