EMaxx issue

[godale03]

Hey Guys,

I pulled the old Emaxx out of the moth balls this past weekend and threw a few packs in to see if it still ran. It does indeed run, but when I hit the throttle It goes, but when I hit reverse it seems to have twice the power and with just a little blip of the throttle in the reverse direction, it wants to flip on its lid.... any ideas? It is a Novak HV system. THanks

Tom

 

[trax de max]

what Tx you got.

 

[godale03]

I am using a Spektrum DX3R and SR3100

 

[hamz9561]

Check your EPA on the throttle.

 

[godale03]

Check your EPA on the throttle.

I checked all of the sub trims... and all are at 0. Not to ask a dumb question.. but I thought EPA was only for servos? I will go back and check though just to make sure. Thanks!

Tom

 

[hamz9561]

Wasn't really thinking, but I meant your expo rate on your throttle

Sent from my SPH-D710 using Tapatalk

 

[Greywolf74]

sounds like the motor direction is reversed....switch it around in your ESC or swap any two of the three wires on your motor and see what happens

 

[godale03]

sounds like the motor direction is reversed....switch it around in your ESC or swap any two of the three wires on your motor and see what happens

I looked at the wires and re-soldered.... It still seems to be very punchy in reverse.... maybe a few pictures with the top off will help? This is very odd. I'm not exactly a rookie when it comes to RC, but I am no expert either. This one is really stumping me....