Element Enduro Sendero SE with Ecto parts

[332_RC]

Picked up a new Element Enduro Sendero SE slider cheap. Threw the leftover Ecto parts on it. The Reedy ESC & 14t 550 brushed motor & Ecto tires went on & I had a 6.0v 18kg servo I never put in my Boomerang & mounted it up. This chassis is a servo on axle & composite 4 link. Has a forward mounted motor, pretty cool, & a 1:1 gearbox. Should be a fun trail truck. Just need a body, receiver, & radio.

 

[majin]

very cool, will the ecto body fit?

 

[Doom!]

@majin You would have to remove the wheel wells and side guards that the esc, and receiver box are on. It's too wide. Otherwise yes the Ecto body will fit. The chasis is the same on all Enduro models.

 

[332_RC]

very cool, will the ecto body fit?

Nah, unfortunately, not.

@majin You would have to remove the wheel wells and side guards that the esc, and receiver box are on. It's too wide. Otherwise yes the Ecto body will fit. The chasis is the same on all Enduro models.

Correct. I already mocked it up.

I believe I'll get a Jconcepts 82 K10 square body shell. I use to have a 81 GMC I drove for years. The decal sheet has the exact same grill.

 

[332_RC]

I wanna keep the inner fenders & side gaurds as stock & go for the scaler look.

 

[WickedFog]

Great looking chassis.

 

[332_RC]

Getting there. GM K10 body. A little more trimming & configuring of the body posts, & bumpers, sanding, etc, gonna look pretty cool.

 

[Doom!]

Getting there. GM K10 body. A little more trimming & configuring of the body posts, & bumpers, sanding, etc, gonna look pretty cool.

View attachment 237033

View attachment 237034

View attachment 237035

View attachment 237036

View attachment 237037

View attachment 237038

View attachment 237039

View attachment 237040

Gonna look good!

 

[332_RC]

Gonna look good!

Thanks Doom. Have a couple of cans of paint I've had a while now. I might do the classic K10 two tone. Dunno yet.

 

[TeknoJ]

That’s so bad azz

 

[Doom!]

Two tone would look great, Now we done gone and seen it, you gotta hafta do it!

 

[332_RC]

That’s so bad azz

Thanks J

 

[WickedFog]

It's too bad Horizon (idiots) discontinued the Pro-Line hood detail set. It had a cowl that would look good on there.

Looking great man!

 

[332_RC]

It's too bad Horizon (idiots) discontinued the Pro-Line hood detail set. It had a cowl that would look good on there.

Looking great man!

Thanks Fog! I didn't know that there was one! That would be cool! The roof does have a moonroof detail.

 

[WickedFog]

Thanks Fog! I didn't know that there was one! That would be cool! The roof does have a moonroof detail.

Here's one.
https://www.amainhobbies.com/shrink...as-1-10-trx4-k10-high-trail-pww13001/p1564332

 

[WickedFog]

I was mistaken on the Pro-Line kit having a cowl hood like your pic. But here is one of the last sets in stock in the US.
https://www.shadowhobbies.com/no-prep-drag-racing-hood-scoops-blowers-8.html

 

[332_RC]

Those are cool. I may end up 3d printing a 350 Chevy for it. There's room up front.

 

[WickedFog]

Oh, and if you do happen to grab that Pro-Line set, you're going to want this pdf, which is this template sheet. The attached pdf should print actual size to cut out the hood opening.

 

[majin]

Getting there. GM K10 body. A little more trimming & configuring of the body posts, & bumpers, sanding, etc, gonna look pretty cool.

View attachment 237033

View attachment 237034

View attachment 237035

View attachment 237036

View attachment 237037

View attachment 237038

View attachment 237039

View attachment 237040

thats sharp af bro

 

[332_RC]

I got it finished. 82 K10 GMC body. 4.75" Pitbull Growlers.