Shadyways916
RCTalk Member
I just was messing around with the numerous bins of miscellaneous parts, and on my revo body I reamed out the factory holes to accept these grommets I use on one of my LST2'S...they really seem to both protect the hole from being ripped open from rollovers, and really hold the body in place...did numerous high speed runs, even some mild jumps 2 1/2-3 ft. And had a low speed roll over and ended up on the top. I basically just needed a way to be able to pop the body off because I was still tuning and dialing in, but they worked so well I'm going to keep using them on different bodies