connectors

[alpinehyperlite]

nope. didnt have any bullet connectors, but chip's hobby room did.

 

[RC Addict]

nope. didnt have any bullet connectors, but chip's hobby room did.

Cool that!

 

[chip cross]

i want to go visit chip too so he can give me a bind plug

I have about 10

i need some connectors to hook up a mamba max to a cc4600 motor and i dont wanna just solder them together what will i need to order

The hobby shop at my house has plenty.

 

[NCNitro]

Please tell me Radio Shack was the trick! I hate it when they get a bad rap

nope. didnt have any bullet connectors,

HaHa, told ya Rat Shack is a waste of time and gas

 

[chip cross]

HaHa, told ya Rat Shack is a waste of time and gas

X23234445

 

[alpinehyperlite]

wasn't my gas. Chip, rollin, and bmiller, all paid for my gas. Thanks for yalls tax dollars homies.

 

[RC Addict]

HaHa, told ya Rat Shack is a waste of time and gas

My Shack's better than yourrr Shack!!! :

 

[NCNitro]

I did pick up a Ricky Carmichael dirt bike from mine for $12.

I already replaced all the electronics, servos, and rear dampener with hobby grade stuff. Replaced the motor with a reedy kryptonite 12 turn modified motor, and redid all the steering linkage, and servo mounts. I still need to balance the gyro and get it all put back together. I originally bought it just to get the rider for the quad body for my Savage, but I just couldnt help myself, lol.

 

[rollinlow]

thanks chip

another thread bites the dust lol some what on topic

wasn't my gas. Chip, rollin, and bmiller, all paid for my gas. Thanks for yalls tax dollars homies.

glad it went to something good lol

 

[BMILLER]

well go get me some 4mm plugs from chip and bring them too me,dont worry u will at least get a half a tank out my next paycheck

 

[chip cross]

I did pick up a Ricky Carmichael dirt bike from mine for $12.

I already replaced all the electronics, servos, and rear dampener with hobby grade stuff. Replaced the motor with a reedy kryptonite 12 turn modified motor, and redid all the steering linkage, and servo mounts. I still need to balance the gyro and get it all put back together. I originally bought it just to get the rider for the quad body for my Savage, but I just couldnt help myself, lol.

I call DIBS

wasn't my gas. Chip, rollin, and bmiller, all paid for my gas. Thanks for yalls tax dollars homies.

It was yur tax dollas' to homie.

 

[BMILLER]

well i dont like barrel connector there were not my friend today. so i just soldered the esc to the motor