Axial SCX24 charging battery

[CharlieTuna]

I just got an Axial SCX24 Gladiator. It's using the Reaction 2s, 30c, 350mah lipo. I have a Hitec 2x Black Edition AC balance charger. Please help me out, I've never charged a lipo battery this small. What adapter from the charger (red and black plugs) to the battery charge lead do I need? Also when balance charging what charge rate do you recommend for this battery.
Thanks alot

 

[Xraycer]

Fwiw I've been using the included charger for all 5 of my 24s for quite some time now, and it appears to work fine. I believe it is designed to be a balanced charge.

 

[CharlieTuna]

Fwiw I've been using the included charger for all 5 of my 24s for quite some time now, and it appears to work fine. I believe it is designed to be a balanced charge.

Thanks Xraycer...I got a little gun shy from watching a couple videos where the included USB charger caught fire and they recommended using a quality charger. Thanks for responding man.

 

[Xraycer]

At one point, I had 3 of them set up for charging 3 batteries at a time, during the overnights.

 

[tntpoof]

a ph 2.0. id charge at .35 amps if possible .

 

[CharlieTuna]

a ph 2.0. id charge at .35 amps if possible .

Thanks TNT.

Thanks TNT.

a ph 2.0. id charge at .35 amps if possible .

Hey TNT....What does ph 2.0. id mean? Thanks

 

[Doom!]

@CharlieTuna I too use the included chargers with no problems. of course I'm lazy so there is that.

 

[CharlieTuna]

@CharlieTuna I too use the included chargers with no problems. of course I'm lazy so there is that.

Ok Doom! I'll go with it. Thanks

 

[tntpoof]

they are jst ph2.0. sorry man I dont run that tiny stuff heres a link so you can see or buy also a google search will show you.
Amazon.com : jst ph2.0 connectors

 

[CharlieTuna]

they are jst ph2.0. sorry man I dont run that tiny stuff heres a link so you can see or buy also a google search will show you.
Amazon.com : jst ph2.0 connectors

Ok buddy, thanks for the help.

 

[WickedFog]

Here ya go. I am not a professional solderer

 

[cdstatz]

I'm too lazy to build my own.....so I ordered 2 of these from Amain and charge at .5 amp on my dual charger https://www.amainhobbies.com/spektrum-rc-ic3-device-to-jst-ph2.0-device-spmxca309/p802513

 

[CharlieTuna]

I'm too lazy to build my own.....so I ordered 2 of these from Amain and charge at .5 amp on my dual charger https://www.amainhobbies.com/spektrum-rc-ic3-device-to-jst-ph2.0-device-spmxca309/p802513

Thanks.

 

[cimh]

Hi. My charger didnt have the right plug and I didnt like the idea of constantly having to pull the ph2.0 plug from the ESC so I made a jst to ph2.0 cable which is left attached to the ESC. My charger has a female JST output cable so I have soldered male jst plugs onto my batteries. Works well and much more simple to unplug from the scx24. Be v carefull not to short the battery when soldering on new plugs - it is best to cut the wires at different lengths to be safe. I charge at 0.4 amps with the SKYRC e680 and usually charge to 50% and only fully charge if I am to use the battery within a couple of days.