Mrgoodwrench35
RCTalk Addict
I've had my 8s Outcast EXB for a few months now. I have thoroughly beat the crap out of it and its held up really well considering. Running the Castle XLX2 and 1100kv motor combo which is overkill but that's what I like.
What I don't like is the sloppy steering. The steering rod ends have a few mm of play in each one which equals a lot when you get to the wheel. I don't see any upgrade parts available really but I did see someone on the Arrma forum mention using the 8s non exb steering rods which are of smaller diameter, but no slop in the ends. I'm considering ordering the steering set from Jenny's for $20 and see if that's any better but I thought I'd see what you guys think. Any better ideas?
What I don't like is the sloppy steering. The steering rod ends have a few mm of play in each one which equals a lot when you get to the wheel. I don't see any upgrade parts available really but I did see someone on the Arrma forum mention using the 8s non exb steering rods which are of smaller diameter, but no slop in the ends. I'm considering ordering the steering set from Jenny's for $20 and see if that's any better but I thought I'd see what you guys think. Any better ideas?