Ok so, As most of you know I have a t-maxx 2.5 and it had some previous "clicking" issues, which we agreed were from the diff, which i replaced both of the diff's and i'm pretty sure the problem is gone, but now its the main problem that i've been having but haven't wanted to face.. my engine. So I can turn it on no problem what-so-ever and it runs, but only for a little while, when I turn it on I have to hit the gas and I can't let it idle because if I let it idle, It cuts off on me. The idling problem is one of the problems, the other is that I can run the truck and it runs fine but it will only run for a short moment (about 1 min. maybe less) and then it cuts off by itself. I'm clueless on what it could be Hopefully the pros on RCnitroTalk can help!!
EDIT: Also sometimes when it cuts off, it might not crank back, so I let it sit for about 10 mins then it cranks again, and By the way I can never get the temps very high on the fact that I can't run it for long at all, I get temps to about 170 (max) and that's it, I can't get it higher, I'm pretty sure I'm running not too rich and not too lean but not completely sure! Thanks for any help!!
EDIT: Also sometimes when it cuts off, it might not crank back, so I let it sit for about 10 mins then it cranks again, and By the way I can never get the temps very high on the fact that I can't run it for long at all, I get temps to about 170 (max) and that's it, I can't get it higher, I'm pretty sure I'm running not too rich and not too lean but not completely sure! Thanks for any help!!
Last edited: