wacmartin
DAMN TREES
Okay guys need some help. So I've got back to running just the Savage Flux after taking some time off from RC. One of my batteries is giving me trouble now, it just seems to be 1 cell in a 2s LiPo. In balance charge mode it says it's at 4.20 this is what I assume to be my problem cell, and the other cell was at 3.80 and doesn't seem to be catching up. Now I tried a discharge and it won't happen because the problem cell says it's at 1.72 and the good cell is at 3.55. Then in fast charge mode, storage mode, and just regular charge mode it says the problem cell is at 4.05 and the good cell at 3.70, and the charge only lasts 10 seconds because they both jump to 4.20 real quick. My charger would also tell me if a cell is at to low of a voltage to charge.
I just storage charged them about a month ago, they always stay at a storage charge, they've always been balanced charged, always stored inside. It's not the charger ( well I hope not) because just charged and balanced and storage charged 5 other batteries with no problems, including the identical battery.
Could it be the balance plug? I'm not comfortable with changing that out at all. Should I just discard the battery?
I just storage charged them about a month ago, they always stay at a storage charge, they've always been balanced charged, always stored inside. It's not the charger ( well I hope not) because just charged and balanced and storage charged 5 other batteries with no problems, including the identical battery.
Could it be the balance plug? I'm not comfortable with changing that out at all. Should I just discard the battery?