Sold / Found WTB a 3ch tx/rx

[SMaxxin]

I need a 3ch radio and receiver with epa's...the cheaper the better!

 

[slowngreen]

does it have to be a 3 pos 3 channel?

 

[MotoGod]

I've got a 75Mhz FM Airtronics MX-3 Setup I'd sell. $50 shipped to your door. TX and 1 RX. I also have a brand new HiTec Aggressor 75Mhz FM Setup as well. Used all of 5 min to test to make sure it worked (Took it in trade). It needs an RX crystal though. I pirated it ;-) $55 shipped for that one.

 

[SMaxxin]

does it have to be a 3 pos 3 channel?

As long as the third channel has epa it will work, I can add a 3 position switch to it. I have a tq3 but without the epa I can't get it set right.

 

[slowngreen]

Free bump.

Sorry, the radio I was wondering about for you doesn't have epa's on the 3rd, just first and second. Why dont you just add epa pots to your tq3 or get a servo stretcher for $20?

 

[SMaxxin]

Why dont you just add epa pots to your tq3 or get a servo stretcher for $20?

Link please!

 

[slowngreen]

For what, servo stretcher? I used to run them on my axials on the dig with tq3's.

http://www.servocity.com/html/180o_servo_stretcher.html

 

[SMaxxin]

The servo strecher is exactly what I need, thanks for the link bro!

 

[olds97_lss]

Huh! Never heard of such a thing! Will have to bookmark that for if my dual disk brakes on the jato don't do what I hope next spring. I have a strong enough servo, but I can't get any more movement due to EPA's maxing out with the 70/30 split on my transmitter.

Or is that not what it's intended for?

 

[slowngreen]

I'm not sure that it would give you more adjustment than your tx does Olds, it might though.

 

[SMaxxin]

I installed the servo stretcher today and it works like a dream, the epa on it will allow from zero movement to about 85 degrees (about 170 total) on my Hitec servo! I'm using a traxxas tq3.

Thanks for the tip SNG!!!!!!

 

[slowngreen]

No problem man, I've used them alot in the past, always with success.

 

[Rolex]

That's amazing. I never heard of anything like that. Learned one more thing about R/C today.