- Messages
- 5,950
- Reaction score
- 9,836
- Location
- Baltimore
- RC Driving Style
- Bashing
- Racing
- Crawling
- Scale Builder
Alot of stuff going on. Let's start off with the buggy. I got a ebay 3D printed center spur gear cover. It's a nice addition and I don't have to worry about the battery wires getting caught on the spur. Also for the buggy I got new carpet tires. I am running what my uncle is running on his xb4. Schumacher Cactus Rears and JCon Swagger Fronts. He also has a lot of spare foam so he gave me a set and cut it up for me so I got some spare foam.
Now for the mini b. I got in the ebay 3D printed servo mounts and horn. I put the horn on the servo and moved the servo. The teeth on the horn were stripped in 2 seconds so I just continued to use a horn included with the savox servo. Good news tho that the mounts work and j get full left and right.
For the slash. I installed a new bumper mount and got the carpet tires on (Schumacher mini pins)
Charged up 2 batteries for each car so I will be ready for the track tomorrow.
Also I forgot to mention is that I fixed the wing mount and put a stronger wing on the buggy.
Now for the mini b. I got in the ebay 3D printed servo mounts and horn. I put the horn on the servo and moved the servo. The teeth on the horn were stripped in 2 seconds so I just continued to use a horn included with the savox servo. Good news tho that the mounts work and j get full left and right.
For the slash. I installed a new bumper mount and got the carpet tires on (Schumacher mini pins)
Charged up 2 batteries for each car so I will be ready for the track tomorrow.
Also I forgot to mention is that I fixed the wing mount and put a stronger wing on the buggy.