Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
will that fix my problem w dog tracking and it will drive straightGet rid of those cheap plastic camber and replace with an adjustable one is where I would stsrt.
Check the bearings. If they have slop, it will transfer.no that’s for the bumper any ideas y it’s driving on its own now i don’t have a throttle trim btw
I was also thinking this could be a possibility.Was it taken apart? If it was, is it possible the arms, caster blocks, or stub axle holders were put on the wrong end or side?
I got a traxxas summit and slash 1/16, and a few sets of other 1/16 arms. Stripped it down to a kit to rebuild and had a headache trying to figure it out. Everytime I pull up traxxas exploded views.I was also thinking this could be a possibility.
i’ll bring it to the shopCheck the bearings. If they have slop, it will transfer.
Another is where the plastic cambers connect, a loose screw or an overly used screw hole can cause play. A nut may help if that the case.
I'm curious if your shock shafts are bent, or if the bottom holding part fell off?
Was it taken apart? If it was, is it possible the arms, caster blocks, or stub axle holders were put on the wrong end or side?
I recommend upgrading it from the stock TX/RX, there are some pretty good ones for under $50.i’ll bring it to the shop
that’s mine