Which on-road Nitro Engine?

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Citrix

RC Newbie
Messages
12
Reaction score
0
Hey Y'all! I've been looking into getting a kyosho inferno gt3 1/8th scale on road kit car and need an engine. Just for some background I'm new to nitro but not new to rc cars, and am used to off road cars, so this isn't only my first nitro but also my first on road car. I've got it narrowed down to a few options that will be listen below.
P.S. If y'all can also give me any other advice and/or inputs on the whole project, servos, receivers, etc. Thank y'all in advance!

FX Engines G501 DLC .21 5-Port GT Nitro Engine (Turbo Plug)
Tuned pipe - FX Engines 3.5cc GT EFRA 2168 On-Road Tuned Pipe Set w/Manifold



SH Engines PT21XT3-P8 .21 On Road Engine
Tuned pipe - ? (Can't find one)



Reds 521 GTS GEN2
Tuned pipe - PIPE 2113 + MANIFOLD M Conical KIT 3.5CC GT S LINE
TS7 Glow Plug
 
Not familiar with FX engines other than the fact they are made in Slovakia Europe. SH engines are Chinese made budget engines from my experience but are pretty decent engines for what they are. Never used Reds as I'm not a racer but my understanding is that they make some really good race quality mills that are made in Italy like so many other good brands in before them.

Bottom line, if I had the money Id go Reds.
 
Back
Top