what makes a good mask

[pornopyrate]

I've been airbrushing for years just getting into body painting want to get extreme but having trouble with frisket film sticking to the body. whats everyone using other than masking tape? i have no light table so i want to stay away from that. so far my best paint scheme came from making my own frisket film out of packaging tape but was time consuming and hard to peel back off, but no bleeding. thanx for any helpful info:arrr:

 

[ImBroken]

Bob Dively's Liquid mask
Put it on very thick. Usually at least 4 layers thick. It dries clear.
http://www2.towerhobbies.com/cgi-bin/wti0001p?Q=&I=LXC099

 

[FastEddy]

I have been using Blue Painters Masking tape.
I don't have any leaking issues if I run my thumb nail along the edges.

 

[robmob]

I use the blue painters tape as well divelys liquid mask. I also use some pactra 1/16" and 1/8" striping tape to make clean edges then fill-in with the blue painters tape.

 

[Lessen]

Plasti-Dip clear aerosol

 

[ImBroken]

Plasti-Dip clear aerosol

That stuff does work well, but definately needs to be applied outdoors.. That stuff stinks... lol

 

[pornopyrate]

thanx guys and i appreciate it very much where do you get the plasi dip clear aerosol I'm willing to try different methods to find what works best for me

 

[Lessen]

I had to order it online (forgot where). My local Lowe's carries it but not the clear type.

 

[ImBroken]

Here's the Performix PlastiDip Clear spray...
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=42777