What’s the stiffest spring I can buy that will fit a traxxas slash shock?

[NurturantQuasar]

In testing my nitro drag car I found 1. The front is way to low
2. I need way stiffer front springs and non progressive rear springs.

What’s the stiffest non multi rate spring that will fit a standard traxxas 1/10 scale off-road shock? My shocks are shortened half and inch so the spring doesn’t have to be as tall as the stock ones.

 

[Heisenburg]

Integy 3 stage kit. It has black, maroon, and yellow springs, softest first, then they get harder. Maybe get the Rustler Electric kit, because they have 2 different lengths . If I remember, they are sold front and rear. I think the yellows are hard enough to bounce a 50 pound dumbell.

 

[NurturantQuasar]

Integy 3 stage kit. It has black, maroon, and yellow springs, softest first, then they get harder. Maybe get the Rustler Electric kit, because they have 2 different lengths . If I remember, they are sold front and rear. I think the yellows are hard enough to bounce a 50 pound dumbell.

Good idea Never thought to look at integy since I tend to stay far away from their products. I’ll check that out once I get home.

 

[Jamr]

I've never tried it but how about two springs?

 

[bill_delong]

They have a linear front set here:
https://www.integy.com/st_prod.html?p_prodid=30311&p_catid=109#.Y9wtq3bMKUk

Can't seem to find a linear set for the rear, but many years ago they had a wider range of linear springs with the rates listed in the specs, I have seen some folks double up the springs as a work around, not pretty but will also get the job done in a pinch

https://www.integy.com/st_prod.html?p_prodid=30312&p_catid=109#.Y9wuf3bMKUk