Greenskeeper
RCTalk Talkaholic
- Messages
- 258
- Reaction score
- 0
- Points
- 0
- Location
- Candler, NC "West Asheville"
- RC Driving Style
- Bashing
Hey isn't there a shiny bling speed level?
-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
V-Twin
- Thread starter MudSlinger33
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
jtboogie
RCTalk Talkaholic
Mudslinger you gotta get those pinnions man I am dying to see this thing running.. so you are wanting to run those 22t to get more high speed correct? because wouldn't a 14 t make more torque because its a lower gearing? I just got a bit confused because you said the 14t would be too high of a gear for you because that would provide more torque than a 22t but less top end. I know when you say gear up it means go up in ratio so it really mean more torque so its kind of backwards with when its said in account to the actual numbers the gearing would be, as the higher the gear ration the less top speed.
Last edited:
- Messages
- 35,104
- Reaction score
- 1,854
- Points
- 2,198
- Location
- In my recliner
- RC Driving Style
- Bashing
- Flying
Well, yes there is. As fast as your knees can go without getting rug burns.
Greenskeeper
RCTalk Talkaholic
- Messages
- 258
- Reaction score
- 0
- Points
- 0
- Location
- Candler, NC "West Asheville"
- RC Driving Style
- Bashing
Wow.... Insert jokes!!!!
If only this wasn't a family oriented forum... Kind of feel like I baited you in to that! Lmao
MudSlinger33
Hardcore RCTalk User
- Thread starter
- #25
Everybody needs to take a deep breath, the pinions should be here on Thursday and before you know it we will all be seeing plaid. 
---------- Post added at 10:16 PM ---------- Previous post was at 10:14 PM ----------
:
---------- Post added at 10:16 PM ---------- Previous post was at 10:14 PM ----------
I could have used my kershaw motor mount , that would have fit twin mambas.
:
when you give it juice, it will be in my town in about 6 seconds !!! LOL ! and yes i'll make sure to bring it back !!! NOT ! can't wait for the video.....i envision a blur at warp speed!
---------- Post added at 10:36 PM ---------- Previous post was at 10:34 PM ----------
Thank you Lord Helmet !
---------- Post added at 10:36 PM ---------- Previous post was at 10:34 PM ----------
^^LMAO
Thank you Lord Helmet !
Greywolf74
I'M TO BLAME!
Lifetime Supporter!
Supporter
Excellence Award
Hospitality Award
Build Thread Contributor
RC Showcase: 8
But you mustn’t forget the motor boat noises with your mouth or you can never attain Shiny Bling speed!
---------- Post added at 11:56 AM ---------- Previous post was at 11:56 AM ----------
when you give it juice, it will be in my town in about 6 seconds !!! LOL ! and yes i'll make sure to bring it back !!! NOT ! can't wait for the video.....i envision a blur at warp speed!
---------- Post added at 10:36 PM ---------- Previous post was at 10:34 PM ----------
Thank you Lord Helmet !
Whats the matter Col. Sanders? Chicken?!
Last edited by a moderator:
- Messages
- 14,626
- Reaction score
- 1,195
- Points
- 1,130
- Location
- In a padded cell
- RC Driving Style
- Bashing
Can't wait to see the video of this beast.
May the Schwartz be with you!
May the Schwartz be with you!
MudSlinger33
Hardcore RCTalk User
- Thread starter
- #29
I got the pinons today and got them installed on the truck, took it for a test drive and everything seemed to be working good, (Que gigantic smile ) This thing is impressive! Even on 4s I had trouble keeping it off the lid, a wheelie bar will be the next upgrade. The motors stayed very cool which will allow me to drop a couple more teeth on the spur for a bit more top end. Couldn't shoot any video as it was dark when I got home. I will try tomorrow but may have to work late again so no promises. There will be video this weekend for sure.
) This thing is impressive! Even on 4s I had trouble keeping it off the lid, a wheelie bar will be the next upgrade. The motors stayed very cool which will allow me to drop a couple more teeth on the spur for a bit more top end. Couldn't shoot any video as it was dark when I got home. I will try tomorrow but may have to work late again so no promises. There will be video this weekend for sure.
sweet!
- Messages
- 9,786
- Reaction score
- 5,668
- Points
- 2,315
- Location
- Great Smoky Mountains
- RC Driving Style
- Bashing
- Crawling
- Scale Builder
- Flying
Glad you got to get a rip in with it mudslinger. A word of advice on wheelie bars; I don't know what your truck weighs, but on my VXL powered alloy pede, I kept destroying both stock Traxxas and even RPM wheelie bars, it would simply rip them apart in crashes. I went to a swami bar, and although it wasn't cheap, it's a bombproof setup and I couldn't be happier.
MudSlinger33
Hardcore RCTalk User
- Thread starter
- #32
Thanks for the tip. Where did you buy your swami bar?
- Messages
- 9,786
- Reaction score
- 5,668
- Points
- 2,315
- Location
- Great Smoky Mountains
- RC Driving Style
- Bashing
- Crawling
- Scale Builder
- Flying
Mudslinger it looks as if I spoke too soon, I don't see one on their site for the E Maxx. You might could contact them and ask about it though. You can find the contact info here
http://www.swami-rc.com/default.htm
MudSlinger33
Hardcore RCTalk User
- Thread starter
- #34
That's too bad they don't make one for the e-maxx, it looks as though it can handle a good beating.
MudSlinger33
Hardcore RCTalk User
- Thread starter
- #35
Well, here it is. Sorry for the poor quality. I'm still thinking of dropping a couple teeth on the spur, but with the gearing I'm using now on 4s I can accomplish half of a standing backflip.
[ame]http://youtu.be/9Aeyebw7orE[/ame]
And of course traxxas would beat me too it!
[ame="http://www.youtube.com/watch?v=O0FafD7DbZw&feature=related"]New EMaxx V Twin Velineon Power - YouTube[/ame]
[ame]http://youtu.be/9Aeyebw7orE[/ame]
And of course traxxas would beat me too it!
[ame="http://www.youtube.com/watch?v=O0FafD7DbZw&feature=related"]New EMaxx V Twin Velineon Power - YouTube[/ame]
Last edited:
trax de max
RCTalk Talkaholic
i don't know something just doesn't sound quite right, but maybe it's my speakers.
looks good Slinger !
bgbdwlf2500
Hardcore RCTalk User
Did u give it full throttle at any point in the vid?
MudSlinger33
Hardcore RCTalk User
- Thread starter
- #39
A couple times, but I don't get much traction as the ground is still frozen. I think with 6s, the standing back flip should be easily attainable.
---------- Post added at 10:32 PM ---------- Previous post was at 10:31 PM ----------
Thanks
---------- Post added at 10:33 PM ---------- Previous post was at 10:32 PM ----------
No not your speakers, my gear mesh was a little tight. I was afraid of stripping the spur. I got it loosened up a bit.
---------- Post added at 10:32 PM ---------- Previous post was at 10:31 PM ----------
Thanks
---------- Post added at 10:33 PM ---------- Previous post was at 10:32 PM ----------
No not your speakers, my gear mesh was a little tight. I was afraid of stripping the spur. I got it loosened up a bit.
trax de max
RCTalk Talkaholic
Cool. good work, you don't see many Vtwins going about now.I think any gearing work you do on it is going to be trial and error unless you know someone who has had or still got a vtwin.
