troubled t maxx

[tmaxxdout]

I just bought a used t maxx with a sirio tx .18 motor on it. I keep stripping the teeth of the spur gear I've put three new spurs gears on and ruined all of them I've takin it to the hobby shop several times and they have no idea why it keeps rippin the gears apart any help would be great

 

[NCNitro]

Assuming your gear mesh is correct, there is a good possibility that your tanny screws have come loose or are stripped out. I have seen this before, under load the tranny will shift and you can strip your spur. Also check the motor mount screws, make sure you use locktite and that none of the holes are stripped.

 

[Tmaxx96]

your best bet is a rrp stelll gear heres a link http://cgi.ebay.com/T-Maxx-Rustler-...trkparms=65:12|66:2|39:1|72:1205|293:1|294:50

 

[tmaxxdout]

Assuming your gear mesh is correct, there is a good possibility that your tanny screws have come loose or are stripped out. I have seen this before, under load the tranny will shift and you can strip your spur. Also check the motor mount screws, make sure you use locktite and that none of the holes are stripped.

i just checked my tranny screws on one side there all tight but on the other side three are stripped out what can i do to fix it

 

[rccks]

https://www.rcnitrotalk.com/forum/showthread.php?t=72474

this should help

 

[tmaxxdout]

https://www.rcnitrotalk.com/forum/showthread.php?t=72474

this should help

that help alot i order the parts from full force now i just have to wait