akaRyken
RC Newbie
- Messages
- 3
- Reaction score
- 0
So I have a JATO, and recently I stripped the spur gear, when taking it apart I felt that the clutch bell was sorta loose. So I ordered some shims for it along with extra spur gears, when I put it back together I started it and the wheels didn't move and it revved very high. After taking it apart again I saw that I forgot to put on the clutch shoes, so I put them on and it did the same thing. I took the shims off of the clutch bell. I also took apart the transmission and found a stripped gear so I replaced it, I haven't tried starting it yet but I am unsure of the issue.