Tegguy
RC Newbie
- Messages
- 14
- Reaction score
- 5
So forgive me but I am a newbie with RC trucks but I have a Tmaxx 3.3 that hasn't ran in about 10 years. I removed the EZ start glow plug wire and I'm using an igniter. I just rebuilt the carb and cleaned out all the fuel lines and everything and got it back together. After adjusting the high speed screw the truck will start but as soon as I pull off the plug igniter it dies. There is no slowly dies it's almost instantaneous. I have tried to adjust the high speed and low speed screws both directions to no avail. I noticed some "fluid" coming from the exhaust but I figured this was from the high speed screw initially.
Is the next step to change the plug or what am I doing wrong?
Is the next step to change the plug or what am I doing wrong?