Time for a motor

[Monteman]

Looking for a new Mill to drop in my Revo. (slayer chassis revo conversion)

Was looking at an OS18TM or 21TM but i figure as good as they are they are quite spendy for just bashing. That said I'm looking for a bit more bang than the 3.3

What are my other relatively easy drop ins that aren't gonna break the bank. Ideally i would love something that will work with the Revo small block Buku pipe that i just picked up.

 

[revo_rob_1984]

Picco .26 maxx or picco .26 JL Red dot

.26 Maxx
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKHF0&P=ML

.26 JL Red Dot
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXVDD6&P=ML

 

[2revo1maxx]

Picco 21, or 26. The 21 is discontinued, but can be found cheap. I have a sirio s27tx (t-maxx mount) in one of mine. It was 159 bucks but I did need a mount and throttle linkage. The s27re (revo) comes with a mount too, but it's 100 bucks more. It has a bb exhaust so it won't fit your pipe either.

 

[Monteman]

will the picco .26 maxx work with the buku? i thought the .26 was a big block.

 

[2revo1maxx]

It's a direct drop in for revo or maxx. You will need a mount. As long as the buku will fit a 3.3, then it'll fit the picco.

 

[Monteman]

yeah the shop i was talking to said about $180 CAD for the mill and the mount. can't go wrong with that for NIB stuff.