Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have just built the Thunder tiger monster truck, when started it runs ok but when the forward control is pressed the truck goes backwards? any suggestions
Thanks for the reply. It doesn't have a reversing servo I assume that I might have the diff back to front?Don't know what thunder tiger truck you have ,but if it has a reverse in it with a separate servo ,then you might need
to check the servo reversing mode on your transmitter!...
Thanks for the reply. It doesn't have a reversing servo I assume that I might have the diff back to front?
Thanks for the reply. It doesn't have a reversing servo I assume that I might have the diff back to front?
solved the issue. The gears inside the diff were incorrectly fitted,Well ,did not indicate what version you have!...My suggestion was a shot in the dark just like your ? was!
Thunder tiger has their hands into many different Mt's especially with Team AE versions which I have.
It would of helped if you gave better info!
solved the issue. The gears inside the diff were incorrectly fitted,If we knew what you had you would have gotten your answer in the first post.
Again, electric (brushed or brushless) or nitro?
solved the issue. The gears inside the diff were incorrectly fitted,Don't know what thunder tiger truck you have ,but if it has a reverse in it with a separate servo ,then you might need
to check the servo reversing mode on your transmitter!...
solved the issue. The gears inside the diff were incorrectly fitted,If we knew what you had you would have gotten your answer in the first post.
Again, electric (brushed or brushless) or nitro?
I did it when I was upgrading the SCX-10/JK. Had an aluminum Vanquish SCX-10 housing and a Vanquish Currie. I forgot that the Currie is a reverse rotation axle...It's known as a "One truck Tug-O-War". We've all done it.