-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
THS Pipe
- Thread starter Çh®i§tiªñ
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Thread starter
- #5
I'm waiting to hear on whether or not there is going to be a pipe made by THS for the Outlaw. This was is a direct fit for the .21bb (I installed it today). I know it will fit on the Outlaw but I'm wonderring if it will be too small for it. After all, that .26 has more oooomph!
My LHS has a couple more on order. 60 bucks or so. They retail for 90+. If you like, I can let you know when they come in. They look exactly like the RD logics pipe dont they???
Performance test in a couple........
My LHS has a couple more on order. 60 bucks or so. They retail for 90+. If you like, I can let you know when they come in. They look exactly like the RD logics pipe dont they???
Performance test in a couple........
nitro dave
Hardcore RCTalk User
- Messages
- 1,364
- Reaction score
- 1
- Points
- 0
- RC Driving Style
I thought the topic read THC pipe....boy was I surprised when I saw what you were really talking about
- Thread starter
- #7
Ok here is the quick review.....
Instructions: (Not Rated!) None included
Parts: 4 1/2 thumbs up! All there! No extras (thus the half point reduction). High quality & great fit!
Installation: 4 1/2 thumbs up! Didnt have to remove shocks but slightly difficult to get onto exhaust port (oil up gasket first!). The standoff piano wire is just long enought to mount under the receiver screw and requires some thought before bending. Also, add a washer between the screw head and the mount before installing. This will hold it to the body better.
Sound: 5 thumbs up! Quieter yet sounds better than stock.
Power Effect: 5 thumbs up! Much better low end and some high end increase! Seemed to 'smooth' out engine running.
Looks: 5 thumbs up! Shine baby Shine!
Overall I give this pipe and header combo a 5 thumbs up! I like the locking pipe/header with the 3 springs. Solid! It took about 2 tanks to get the idle, HSN and LSN where they needed to be to realize the impact this pipe has. I was able to go back to stock on the LSN and had to increase idle and lean the HSN. I had the front wheels off the ground more than once! Smoothed out the overall running of the .21bb. This is one of the best upgrades I have done to my Savage yet!
Cost should be around 55$ even though retail list is 90$.
Instructions: (Not Rated!) None included
Parts: 4 1/2 thumbs up! All there! No extras (thus the half point reduction). High quality & great fit!
Installation: 4 1/2 thumbs up! Didnt have to remove shocks but slightly difficult to get onto exhaust port (oil up gasket first!). The standoff piano wire is just long enought to mount under the receiver screw and requires some thought before bending. Also, add a washer between the screw head and the mount before installing. This will hold it to the body better.
Sound: 5 thumbs up! Quieter yet sounds better than stock.
Power Effect: 5 thumbs up! Much better low end and some high end increase! Seemed to 'smooth' out engine running.
Looks: 5 thumbs up! Shine baby Shine!
Overall I give this pipe and header combo a 5 thumbs up! I like the locking pipe/header with the 3 springs. Solid! It took about 2 tanks to get the idle, HSN and LSN where they needed to be to realize the impact this pipe has. I was able to go back to stock on the LSN and had to increase idle and lean the HSN. I had the front wheels off the ground more than once! Smoothed out the overall running of the .21bb. This is one of the best upgrades I have done to my Savage yet!
Cost should be around 55$ even though retail list is 90$.
Last edited:
Supernitro17
RCTalk Addict
- Messages
- 653
- Reaction score
- 0
- Points
- 0
- RC Driving Style
probably a stupid question , but do they make pipes for touring too ? i like that one
- Thread starter
- #13
I believe so but would have to look in a catalog as they do not have a website. Ill see what I can dig up. Might need a day or two though.
You can prob find some on the web for sale but I dont think anyone sells their whole line. Which may be limited.
You can prob find some on the web for sale but I dont think anyone sells their whole line. Which may be limited.
Supernitro17
RCTalk Addict
- Messages
- 653
- Reaction score
- 0
- Points
- 0
- RC Driving Style
k thanks 
- Messages
- 19,394
- Reaction score
- 909
- Points
- 2,075
- Location
- Central Florida
- RC Driving Style
- Bashing
- Racing
Yes they do, I am planning on getting one for my RS4 3
Heres a link to THS Racing pipes at Tower Hobbies
Last edited:
TheShagler
RCTalk Racer
- Messages
- 86
- Reaction score
- 0
- Points
- 0
- RC Driving Style
????????????
Çh®i§tiªñ Where did you buy your new pipe?????
Çh®i§tiªñ Where did you buy your new pipe?????
Supernitro17
RCTalk Addict
- Messages
- 653
- Reaction score
- 0
- Points
- 0
- RC Driving Style
thats weird, i looked at the one for the 1/10 scale on road, and it says it is made to fit the .15 hpi engine, but looking at the picture there is no way the header will connect to the engines exhaust manifold ... the one made for the rs4 3 will . but i have a supernitro , so now I'm just flat out confused
TheShagler
RCTalk Racer
- Messages
- 86
- Reaction score
- 0
- Points
- 0
- RC Driving Style
you paid $55.00?????
- Thread starter
- #20
I think so. I could be off by a few dollars. Ill check when I go back in there tomorrow. Yeah, I know, how could I not know... Prob is the overall bill I have when I walk out of there.....
Did you find a better price out there?
Did you find a better price out there?