Flicky79
RC Newbie
- Messages
- 2
- Reaction score
- 0
I have recently added a hyper 18 engine to my RC Car that i have had for many years. I have completed the break in, but having some issues with the carburettor slide. At times it wont open (Slide) easily, some times it wont open, then when it occasionally stays open, It then wont reset when I apply the break. When using a throttle return spring, it wont Allow the linkage to open the slide. When i pull the barrel by hand it does have some resistance. I have pulled the carbie down twice, cleaned it up and realigned to ensure the linkage is parallel to the barrel, with not much success. Any assistance or thoughts would be greatly appreciated.