steering problem?

[john28]

i have fully charged battries and when driving car after about 2 mins i can only turn 1 way to the left when try to the right nothing like they no power but then if i take steering arm off servo the servo wheel goes left and right no probs connect the arm same 1 way only i looked to c if anything getting stuck can't find nothing anyone got any ideas cheers.

 

[Metalhead Matt]

Look it over closer. Something has to be causing a bind.

 

[Z400]

Does your servo even put out enough torque?
Model of r/c your having problems with?
Changed anything prior to this problem?

 

[john28]

Does your servo even put out enough torque?
Model of r/c your having problems with?
Changed anything prior to this problem?

i new to this so dont no if its giving enough torque.i have the ansmann virus I'm going to fully strip steering down today its new so I've not changed nothing just had little bump with a wall but can't c any parts bent or damaged? cheers

 

[Z400]

If you can post pictures..

Post as many as you can buddy.

Pictures will help us out here.
Most important thing though..

What r/c vehicle are we talking about?

 

[john28]

If you can post pictures..

Post as many as you can buddy.

Pictures will help us out here.
Most important thing though..

What r/c vehicle are we talking about?

think the problem was the servo they just not working now checked all connections they all connected fully charged battries still nothing I'm going to replace them do u or anyone who reads this no which is a good servo pack to buy cheers