Show off your pride and joy

[robmob]

Lets see your ride.

Don't be shy, bone stock or upgraded, clean or dirty. Show it off.

Post a list of upgrades if you have done any, and lets see some pics.

Alum Steering Servo Skid
Airtronics 94358Z Steering Servo (Stock steering servo went to throttle duty)
JR XS3 Radio
2100mah 5 cell 6V NiMH RX battery
Throttle return spring
Ofna Failsafe
Proline Maxx Performance Steering Kit
Lunsford Titanium Turnbuckles with Proline Maxx Ball Ends
RPM A-Arms and Steering Knuckles
RPM Shock Towers
RPM Skids front, rear and center
RPM Bumpers
RPM Lower Spring Cups
RRP 19T Clutch Bell
RRP Brake Kit
RRP 72T Metal Double Disk Slipper
GA 3 shoe clutch
Sirio .18 with Big Bore Pipe
GS Exhaust Deflector
Traxxas Big Bore Shocks
Trinity Heavy Blue Springs (now it has a mix of Trinity Blues and RC Raven Dual Rates) with 35wt in front and 40wt in rear.
MIP Shiny CVD’s on all four corners as well as center shafts
Ofna fuel filter
GS Blue Fuel Tubing
Motor Saver Air Filter
Proline Maxx Alum Wheel Hexes
Traxxas Machined Alum Engine Mount
RC Solutions Alum Bulkheads front and rear
RC Solutions Alum Chassis Braces
RC Solutions Alum Roll Cage

 

[Candyman]

OK, you're calling us out. Here's mine.

The body is a 200mm HPI Beetle Cup Racer. My second airbrush job.
Mods include:

OS .15 CV-RX with slide carb conversion
Duratrax Overdrive ST big tube header
Associated 7730 tuned pipe
MotorSaver air filter
Traxxas Forward Only Conversion
Home made shock socks
Bearing upgrade to steering
Trinity Heavy Heavy Monster Springs
Hitec 645 hi torque steering servo
RPM front, center and rear skids
RCNT blue braided fuel line covers

Thats it so far...

 

[StrechM]

and mine,

Sirio 27pro
Full Proline Kit
Proline Maxx Steering
HCR bulkheads
Ti hinge pins
MIP CVD's
8 Kyosho shocks w/ Trinity Blues
way to much to list ...

I've got a feeling that we are going to see some very sweet rides.

 

[Digital Liquid]

Cold 2 D Maxx Hop-Up List:

ACNCM Aluminum Hex Hub Kit
Dubro In-Line Filter
Fullforce Spider Race Chassis
Golden Horizons Cooling Head
GPM Racing Allow Bearing Steering w/ Plate
GPM Racing Steel Main Shaft Set
GPM Racing Titanium Front & Rear Swing Shaft
Hobbico Exhaust Deflector
Hot Bodies Jumpstart Starting System
Imex Nevada Chrome Rims
Integy Aluminum Clutch Shoes
Integy Aluminum Engine Mount
Motor Saver High Volume Air Filter
Pro-line Ball Ends
Pro-line Lunsford Titanium Turnbuckle Set
Pro-line Maxx Masher 2000 Tires
Racer’s Edge Aluminum Steering Servo Skid
RC Raven Dual Rate Shock Springs
Robinson Racing Vented Flywheel
Rockhoundz Titanium 3-Piece Skid Plate Set
RPM 2-Stage Shock Pistons (Med-Heavy)
RPM Bulkhead Brace
RPM Front Step Bumper
RPM Long Body Post Mounts
RPM Molded Shock Tower & Body Mounts
RPM Rear Step Bumper
RPM Wide A-Arms
Traxxas Anodized Aluminum Pivot Balls
Traxxas Anodized Steering Bellcrank Posts
Traxxas Steering Ball Bearings
Traxxas Titanium Hinge Pin Set
Trinity Sirio Big Bore Pipe
UFSS Stainless Screw Kit

 

[FSTFBDY]

I'll make a full list in the Morn. I'm headed to work.

HCR Ti Chassis, F/c/r skids
MIP CVD
Sirio .18 w/ pipe
RRP Slipper
Alum rear bulks,
Alum Front and Rear Shock Towers and Braces
Complete Stainless screw kit.
Hi tec Stering servo
RPM A-arms
Motor Save Air Filter

Will post pic's after I strip and polish all the pieces. but for how heres one of trial fitting it all and pulling it back apart.

90% of all my parts were bught from humerboltblazer.

Befor the HCR parts

Time for a new Lid but I dono what I want.

 

[Maxx Trooper]

Sportmaxx-

T-maxx-

My Sportmaxx is going under some serious moding-
Pro-line maxx suspension kit, CVD's, OS .15 CV-X, aluminum rear bulks, aluminum skids, shock socks

What it has now-
-RPM monster claw rims
-Pro-Line Road hawgs
-RRP Diff gears
-Integy aluminum threaded shocks
-Rechargeable reciever pack
-Dual gas tanks


My t-maxx is getting some RRP diff gears and RPM monster clawz w/ IMEX Baja tires, Wasp. 18

What it has now-
-Chrome Full Roll cage
-R/C Raven black anodized chassis
-R/C Raven shiny aluminum skids
-R/C Raven black anodized chassis braces
-Aluminum bulkheads
-Aluminum bumpers
-Blue Aluminum shocks
-Steering servo cover
-1/8th scale 125cc fuel tank
-RPM Extended a-arms
-RPM Shock towers
-Shock Socks
-Hi-tech 645 steering servo
-Futaba throttle servo
-Motor Saver Air Filter
-RRP steel 72th spur gear
-Aluminum clutch shoes ( www.ssrcracing.com )
-Paris ripple turbo pipe
-TRAXXAS Big Tube Header
-Forward Only Conversion

(Basicly I hopped up my t-maxx, and had enough extra parts to make a sportmaxx, just had to buy a tranny and misc little stuff)

and both of them are getting a good cleaning.


well in a week or so look for some new updated pic.

later
:hypno:

 

[Team 17]

Here's an action pic of mine.

Upgrades: Not much. skid plates & Motor filter saver

 

[cozea]

uhh my magic wheel. with t-maxx parts: fuel tank, reciver box batt. box, chassis, lower braces, header, clutch. and disruptor body, and in 2 days il have a pro .15 in there that i got for 30 bucks with ez start instead of the smartech engine in there now.

i dont even have bumpers. somebody stole them. after i painted them while they were drying.

id say its a t-maxx now. :normal:

 

[RaCinJason399]

Not many upgrades... Just some RPM upgrades...

 

[wdavidhicks]

I'm gonna try out these paddles in two weeks.

I know... I need a bigger gas tank...

 

[SkyMaxx]

A full listing of my upgrades can be found HERE . This was set up when I was trying to sell the SkyMaxx. It is now off the market, unless someone really, really wants it.

As for a picture, here you go:

 

[ImBroken]

RC Limited .21 Conversion
OFNA Hyper 8 port
RRP FOC
RRP Spur
Barnburner CNC Diff cases
RRP diff gears
RRP Hardened steel cb
Dynamite Header/Pipe
Hardcore Ti. skids
Hardcore rear driveshaft
Hardcore steering knuckles/caps
Hardcore bulk braces
Harcore Ti. pivot balls
Traxxas Al. bulks
Lundsford Ti. turnbuckles
Lundsford Ti. Hinge pins
Dynamite front/rear cvd's
RPM front shock tower
TOP Al. rear shock tower
Racers Edge Al. Tranny case
Orion rims
Traxxas Al. servo mounts
Proline Steering kit
Hitec 5645 (steering)
Rockhoundz Al. bumpers
GA Flywheel/3 shoe clutch
RPM arms
MotorSaver Air filter
IMEX SwampDawgs
UFSS Stainless screw kit... (Thanks RCNT)

 

[$$pittmaxx]

my t

 

[okihost]

Hey RaCinJason399 where did you get those rims, they look like stockers so I am wondering if you bought them somewhere or if you did it yourself. Either way they look pretty sweet.

 

[roindaouse]

Pardon me for being stupic. But how do you post a picture right with your message?

 

[okihost]

Originally posted by roindaouse
Pardon me for being stupic. But how do you post a picture right with your message?

All you need to do is use the

If you go and hit reply to do a full reply there is also a IMG button you can hit and type in the full link.

 

[robmob]

Originally posted by roindaouse
Pardon me for being stupic. But how do you post a picture right with your message?

You need to right click the desired image from your gallery then click on properties. Copy the url for the image, then paste it in your post between the img tags.

Copying the url from your browser bar will not work.

 

[olds97_lss]

Here's a shot of mine... I know, i suck at painting.

Body On:

Body Off:

Manufactured Items:
XTM 21 conversion
OS 21 RG-X(P)
RPM Arms and rear shock tower and skid protectors
Integy diff cases
Racers edge trans case
ACNCM bulks
RRP Full steel trans gear set Including spur and FOC
Maximizer diff cups
Boca Green Seal bearing set
HPI Savage rear tires
IMEX front tires
Trinity black springs
Huricane Aluminum fuel tank (not on currently, to cold to mess with cap)
Traxxas al wheel hex's
NewEra 3 point roll bar
Pro-Line Heavy duty turnbuckle ends

Home-made Items:
3/16" steel skid (trans to rear)
Door stopper bumpers (i know, stupid, but effective)
Aluminum cooling head wrap
Throttle servo mounting plate
Stainless steel shock mounts (upper)

Comming soon:
UE Knuckhead Al bulks and 9.5 buggy shocks (4)

 

[SkyMaxx]

What is the jacket on the cooling head of the engine? Blocking the air flow over the fins of the cooling head does not help it function properly. Is this your winter running rig?

 

[olds97_lss]

Yep. I was having a hard time keeping he 21 RG warm. I don't like to be below 180. By doing this, it added about 20 degrees. I take it off when it's above 35-40 out.