• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

Shocking question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Have you contacted jennysrc.com ?
You can tell them what you need and they can tell you what they have that fits. You might get lucky there. 😎
I just looked and all of there shocks are out of stock right now. Thank you
 
For jumpy 1:10s, you cannot go wrong with GMade Aerations. They're completely underrated and not given enough praise. They have a 93mm shock which, if 3mm is too long, can easily be internally limited to meet your length requirements. They have 3.5mm shafts, and when built correctly with silicone grease, are butter smooth and do not leak. I used to run them exclusively on all my race LMTs and retro clods. Those trucks jumped better than anything on race day and made lots of people mad because they all ran overpriced Pro-Line Powerstrokes which are nearly impossible to get a good tune on.

GMade 93mm XD Aeration Shocks

They also come in a piggyback version which may look cool on a pre-runner:

GMade 93mm XD Piggyback Shocks
 
For jumpy 1:10s, you cannot go wrong with GMade Aerations. They're completely underrated and not given enough praise. They have a 93mm shock which, if 3mm is too long, can easily be internally limited to meet your length requirements. They have 3.5mm shafts, and when built correctly with silicone grease, are butter smooth and do not leak. I used to run them exclusively on all my race LMTs and retro clods. Those trucks jumped better than anything on race day and made lots of people mad because they all ran overpriced Pro-Line Powerstrokes which are nearly impossible to get a good tune on.

GMade 93mm XD Aeration Shocks

They also come in a piggyback version which may look cool on a pre-runner:

GMade 93mm XD Piggyback Shocks
Those would definitely look good on the prerunner, I was just messing with my Ibeam kit and just can't get the shocks right. Thank you
 
Back
Top