servo operation.

[Kephasd]

I recently purchased a futaba metal gear servo. The servo is used for throttle and brake. But the throw is longer on the throttle than the brake I can't remember if it has done this in the beginning? Is the servo damaged? Can it be repaired fairly cheap? Also my radio is old it only has trim for the throttle no throw adjustment.
Thanks

 

[w bill]

Need to see a pic of your set up.Your gona have to change the linkage set up to cmpensate for the throw difference.

 

[Kephasd]

All of the linkages work properly I was just curious if the servo was damaged? It's a futaba s3305

 

[Rolex]

You need to remove the servo horn, turn on the Rx and Tx, center the servo, and replace the arm. If it isn't right, either change the hole the linkage is in, change the position of the horn on the servo, or adjust the end points if you have a computer radio.
It's all in the adjustments.