Schumacher menace help!

[markfirefly]

I'm new to all this a bought a menace! Iv got used to it but had a little accident. .. I hit a curb head on damaging the front bumper, breaking the filter line inside the fuel tank and also breaking the 4 way battery holder! Fixed the problens.. servo all working car starts but it wont pull off just revs over. I notice the 3 gears only the 2 are spinning when started. Have a ruined the clutch with the impact?? Any ideas??

 

[moe7404]

the best bet is the gears in the trans are striped. sooooo you crashed the front? EVERYONE does that. and it wont be your last.

 

[markfirefly]

The gears only started playing up after the crash. I stripped it all down u can see the gears are not linking up with the other cogs. I had them lined took it for lil blast and stripped lil bit off the 1st gear. As thete anyway on lining them back up. I stopped the car asoon as I heared it. Lil tear on the 1st gear. Thanks

 

[markfirefly]

I need to mesh my gears.... anyone ach a menace with metal gears?

 

[sv250]

Theyre famous for stripping gears. I got rid of mine by smashing it with a hammer. I dont know of anybody that makes metal gears.

 

[markfirefly]

Will they stil strip if I mesh them right?

 

[sv250]

Yes, thyre brittle.

---------- Post added at 5:13 AM ---------- Previous post was at 5:07 AM ----------

My menace beffore

After it broke for the last time a 3 foot fall from my work bench broke an axle arm and knuckle. I had just fixed it. I finished off with a hammer. Best thing i ever did saved me a ton of $$$. Pos broke every single run.

 

[markfirefly]

Pmsl! U still taking your anger management courses lol. You could have saved some if thos parts and sent them my way lol