Schumacher Havoc

[EB4S2PRO]

Hey guys

Bought a another second hand project this week and wondering if anyone has suggestions regarding the Schumacher Havoc monster truck. The car uses this funny interlocking wheel attachment and the rims and tires are hard to come by, does anyone know how to convert these interlocking attachments to a 17mm hex or something easier to work with, as you can see in the image I spent the last 2 days thoroughly cleaning and refurbing the car as it was in a run down condition when I got it.

 

[olds97_lss]

Maybe post up a photo of the weird wheel/hub setup it has. Schumacher always seemed to do things their own way.

 

[EB4S2PRO]

Hey so here are some images of the wierd attachment that Schumacher use on the havoc, the little purple 3 tooth attachment interlocks with the rim on the wheel and the smaller side teeth interlock with the piece on the dog bone side of the suspension. Schumacher have ruined a good car by making it impossible for the buyer to enjoy upgrading the car and in saying that Schumacher do offer 23mm hex converters but again almost impossible to find 23mm hex wheels.

Maybe post up a photo of the weird wheel/hub setup it has. Schumacher always seemed to do things their own way.

 

[Certified Mike]

Unfortunately, but fortunately too... It looks like if you could get to a hobby shop and try a few, you could prob still find a hex that will fit in the axle and pin... You may find a dremel mod or 2 may be in order for final fit tho.