savage 25 servo help

[MR4X4KING]

hello everyone need allitle help looking for the correct servo on a upcomming project i am going to start. i have a stock savage 25 that i am going to add a 4.6 and make it 5 inches longer and 2 inches wider and i am going to run 40 series big joes and beadlocks with 23mm adapters what servo will i need to make this bad boy turn

 

[flm_savage]

I hated the 23mm hex's but to each his own. With the width of the big joes, i don't know if they make a servo that will turn them lock to lock with ease. I run the Airtronics 94358 and love it. It would be more than ample to turn them when running. Just set your endpoints and servo saver accordingly.

 

[MR4X4KING]

any one else have any ideas or comments

 

[eartaker]

well u could always make a servo... duno how good you are with electronics but it is easy, you can get a geared motor that will be enough power to rip out the front end if u wanted lol

 

[flm_savage]

brushless steering........

 

[olds97_lss]

333 oz
Not real sure what makes it "specific" to robotics... It isn't a 360 degree servo. Maybe it's just modifiable to 360 degree operation.

A little cheaper here: Servo City HiTech Servo

This ones a little cheaper, but is also a little weaker/slower: Futaba Digital 278 oz