robmob
LET’S GO BRANDON!
Staff member
Supporter
Excellence Award
I don't know how long RPM has made one of these, but it sure looks to make short work of creating body holes.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEV06&P=7
I always use a reamer which can make for inconsistent size holes if I'm not careful. With one of these you would just need to mark the center of the hole, put the body over a piece of wood at the hole location and whack the punch with a hammer.
I am going to pick one up the next time I make an order at Tower or anyplace else that carries it.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEV06&P=7
I always use a reamer which can make for inconsistent size holes if I'm not careful. With one of these you would just need to mark the center of the hole, put the body over a piece of wood at the hole location and whack the punch with a hammer.
I am going to pick one up the next time I make an order at Tower or anyplace else that carries it.