Recommend ESC and Brushless sensored motor !

[yachtnutz]

Hey guy’s can you recommend the best ESC and sensored brushless motor for my 6x6 . It has a 560 brushed motor that came with it ,but I’m going to go with the brushless sensored motor . It is a very heavy model to begin with , and I’ve added more weigh to it with all the extra mods . I’m getting a 16 channel radio setup ,and it will have a 22000 3S lipo battery !



Thanks

 

[Addict Rc]

Nice Truck love it I’m not sure what your budget is or what you need so you need waterproof or no? does it have to be sensored or no?
But here’s one it can run 3s and there different kv options to not sure it’s waterproof

 

[Mrgoodwrench35]

Is that a 'crawler'? I'm a huge fan of the hobbywing axe system. The load sensing setup Is amazing, especially for low speed. You can get it with a 540 or 550 can. I have one in a trx4 that I use to pull my 1/5 outcast back to the truck when the batteries die (yes, I'm that lazy ). Plenty of power and runs very cool. Easy built in Bluetooth programming too. Just put the app on your phone.

 

[Tunedfrog]

Awesome truck.

 

[Doom!]

Castle Copperhead is 2 to 4s compatible is rated up to nine pounds, not sure how heavy your rig is.

 

[Chubaka]

Castle Copperhead is 2 to 4s compatible is rated up to nine pounds, not sure how heavy your rig is.

This is a castle copperhead 2250 on 3s, largest pinion I counld fit on an ax10 tranny after grinding out the holes.

I had it barley warm in the 5 months of owning. This dolley is 35-40Ibs. Off the line I can't feel it, once I get 1/8-1/4 throttle, I can feel the weight but it never struggles. After that 1/8 to 1/4 throttle, its all about how can we stop this quickly.

I'm diggin your truck @yachtnutz!

 

[tntpoof]

what size motor shaft did brushed motor have?. I looked and see some 560 size brushless none are censored they were in the 560 kv range with 6mm shafts. i dont think a 540 or 560 is gonna cut it with that truck not sure the scale that would help pinpoint a motor. id run a castle 8 as esc ..

 

[yachtnutz]

Nice Truck love it I’m not sure what your budget is or what you need so you need waterproof or no? does it have to be sensored or no?
But here’s one it can run 3s and there different kv options to not sure it’s waterproof

Hey thanks for the info I really don’t have a budget so the sky’s the limit. I definitely want waterproofed setup !

best regards

Castle Copperhead is 2 to 4s compatible is rated up to nine pounds, not sure how heavy your rig is.

It’s at least 20 lbs , I have to weigh it once I get it all together ,was looking at the Castle products !

Is that a 'crawler'? I'm a huge fan of the hobbywing axe system. The load sensing setup Is amazing, especially for low speed. You can get it with a 540 or 550 can. I have one in a trx4 that I use to pull my 1/5 outcast back to the truck when the batteries die (yes, I'm that lazy ). Plenty of power and runs very cool. Easy built in Bluetooth programming too. Just put the app on your phone.

I really don’t know to be honest with you , I guess I could make it a crawler it’s 6x6 with 6 wheel steering not much flex the way the suspension setup is . It’s based on a actual military truck being used by the Marines !