Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yes I just racing for fun with friends no rules ...so what u mentioned is capable to run on 3s..Are you setting it up as a drag car? Cuz typically they only race on 2S. If your racing on 2S then Id put a Tekin RX8 with a 2.5T or 3.5T Tekin Eliminator motor in it. you're going to need a high quality lipo to power that combo though. Id look at SMCs SRD lipo packs. I hear good things about the fantom 3T motor as well
If your just messing around having fun with it and not seriously racing it then it doesn't matter to much.
Are you setting it up as a drag car? Cuz typically they only race on 2S. If your racing on 2S then Id put a Tekin RX8 with a 2.5T or 3.5T Tekin Eliminator motor in it. you're going to need a high quality lipo to power that combo though. Id look at SMCs SRD lipo packs. I hear good things about the Fantom Icon 3.5T motor as well as the Trinity Hole Shot Drag Master 3T motor. Personally though Id go with Tekin.
If your just messing around having fun with it and not seriously racing it then it doesn't matter to much.
Great info,,,that is plenty the speed with 2s I'm looking for.....so they don't allow 3s but u can have a 1/8 scale esc...I'm over a. Hour away from nearest organized event but will b nice to have something to compete occasionally...will be a lil while but I'm sure 2b back once it's time to tune...any suggestions on aftermarket tires are popular???& I thought I was in a dragrace forum..I'm not to good on this internet stuff..I am way spread out in rc world..Trucks,cars,,planes, drones. Elec..nitro....thanks for the helpThe RX8 can but the eliminator motors are only 1-2S capable. That being said that set up on 2S should have you running 132ft (the length of a no prep drag strip) in 2.4-2.6 seconds. Once you have the car dialed in and set up properly. you're friends would have a hard time beating that even on 3S
you're welcomeGreat info,,,that is plenty the speed with 2s I'm looking for.....so they don't allow 3s but u can have a 1/8 scale esc...I'm over a. Hour away from nearest organized event but will b nice to have something to compete occasionally...will be a lil while but I'm sure 2b back once it's time to tune...any suggestions on aftermarket tires are popular???& I thought I was in a dragrace forum..I'm not to good on this internet stuff..I am way spread out in rc world..Trucks,cars,,planes, drones. Elec..nitro....thanks for the help
I'm the new guy, from Texas that also has a DR10 and shoe string budget, I want to run stock class. I assume you change gears, 2S, etc. But the rules seem different everywhere it seems. Regardless I change my pinion and spur gear and put a spool in the diff, now at least it's getting more interesting but a 22S and drag Slash is faster.Like to hear what others have done with a stock DR10..I really like Tekin so anyone has that I'd really like to hear what u went with and any changes necessary to run 3s